Application Instruction

How to prepare the surface?

- Area must be properly clean before applying decal. (We recommend rubbing alcohol).

- DO NOT use cleaning products because many will leave a residue behind and will prevent the decal from adhering.

- Area must be smooth, oil and wax free.

- If chemicals for example Rain-X is on your window you should give it a few
weeks for the Rain-X to be completely gone before applying decal.

- If you wash your car in a auto car wash you should give it a few weeks
for the wax to be completely gone before applying decal.

- If the area has recently been painted, give it at least 30 days before applying decal.

- We DO NOT recommend installation on cold surface or during cold weather. Condensation will cause decal to not adhere properly to the surface.

How To Remove Decal From Backing?

1. Starting from one side, apply pressure using a credit card to slide across 
the surface.

2. - Place the decal facing down on a flat surface.
    - Slowly remove the transfer tape from the backing  CAREFULLY, DO NOT RIP THE DECAL.
    - Keep the transfer tape flat, only bend the backing.


3. If part of the decal doesn't come up, go over that area with the
 credit card again.